Very few bikes live their lives without being tweaked in some way, to suit their owners’ needs, whims and obssessions. These can include functional changes, utility mods, comfort additions and – of course – gratuitous bling, and I’ve carried out a good many of them. Ducatis are no exception to that, and there’s an entire canon of mods that people have carried out to ‘improve’ this generation of Multistrada. This is about those I’ve made. Your taste may vary:
Functional Mods

Front Brakes. This is the biggest investment: the standard Brembo calipers on the Multistrada are perfectly good: they do what it says on the tin. But if you want some true brick wall braking, along with very fine modulation and feedback, an upgrade does help. Starting with the least expensive bits, it goes: change pads, fit braided lines, upgrade the disks and, finally, new calipers and master cylinder. Put all of those together and, however you do it, the bill is going to be north of about £1500. Which I did, by replacing the stock calipers with Brembo monobloc M50 calipers and pads, Spiegler braided hoses, adjustable banjos and – the icing on the cake – an adjustable, forged Brembo RCS17 master cylinder. The result? Brakes which are consistent, fantastically sensitive and hugely controllable. It’s slightly ironic, given that I rarely use the things, but it’s really satisfying to have this level of control when you need it.
Brake Discs: Although a number of people claim significant improvements from just changing the OEM Brembo discs for the Serie Oro aftermarket versions, I made the change to alleviate the pulsations caused by grunged up disc bobbins. Whatever the reason, they certainly made a difference: not only was the pulsation gone, but braking definitely had more bite. How much of that was down to the disc material and how much to the originals being 13 years old is up for debate.
Suspension Control Unit: for someone who takes some satisfaction from the process of setting up suspension to suit me, moving to an electronic suspension system was somewhere between an experiment and an act of faith. The (apocryphal) back story here is that Öhlins, having worked with Ducati to create the original electronically adjustable suspension for the Multistrada 1200s, were mightly hacked off when Ducati went with Sachs for the first generation Skyhook machines. So they created their own semi-active plug-in suspension control unit for the 1200S, which upgraded existing machines to semi-active suspension. They then sold it at a remarkably reasonable price, and as a ten minute swap in job.
And it works. Moreover, you can have full manual control of damping as well, and with much finer control than offered by the stock system. So I use the control units automatic algorithms for ‘normal’ riding and I’ve given Urban mode over to a set of manual settings I’ve generated for different purposes. But most of the time, the automatic systems do just fine. This is a very worthy upgrade.
Rear Spring: having visited the Ducati factory, I did notice that most of the Italian riders (I assume their test crew) seem to be on the light and lithe end of things. I however am not, and nor are many of the rest of us in Northern Europe. And that’s before you start adding a pillion and luggage for a tour. So, swapping to the alternative uprated (100N/mm) spring that Öhlins offers was a no-brainer, and it’s made a big difference: in all suspension modes and loads, the preload can be kept in a usable range, which certainly wasn’t the case with the standard spring.
Utility
Keyless fuel cap: There is very little point in having a keyless ignition if you don’t have a keyless fuel cap. Less, in fact, as it means having to remember which pocket you’ve stashed the key in whenever you stop for petrol. So the keyless fuel cap makes all the difference there.

Touratech Power distribution unit: this provides both switched and unswitched power and fused 12v outlets: it installs in the rear under-seat compartment and makes it much easier to add accessories, rather than having to stack them on the limited space available at the battery terminals. From there I run:
Dual outlet USB charger: Tucked under the seat, with leads run forward under the tank, this powers a Quadlock phone charger on the handlebars and the front-mounted GoPro.
SW-Motech powered tank bag/tank ring: This proved very useful for a few years, until the power feed failed (I’ve traced the failure to the SW-Motech relay). It’s pretty much redundant now though, as everything I’d want to power is fed from the Touratech unit.
Scott eOiler: Just what every chain transmission motorcycle ought to have (barring the sort of full enclosure chain bath that Ariel used to provide). Works well, but I’d recommend the dual outlet option over the single outlet I have. The only downside is that it does fling quite a bit, no matter what the drip setting. A bit like my nose in cold weather then…
Grip Puppies: As the original grips were wearing down, I wanted to protect what they had left, especially considering that, to replace them, requires replacing the entire heated grip system – Ducati doth not make it easy. I also have slight arthritis in my proximal thumb joints so, although I’m not a huge fan of wider grips, I bought and fitted a set of Grip Puppies. These are easy to fit and, after a couple of days adjustment, I hardly now notice them. The heated grips still work well through them, although I usually have them up a setting from what I’d use without the grips.

MRA Touring Screen: at 1.84m in my (or anyone else’s) socks, I was getting a bit of buffeting to the top of my helmet on long motorway drags. MRA’s Vario-Touring screen, with its adjustable top lip, has made a huge difference and was an immediate keeper.
GoPro Mount: I started recording journeys, for blog and self-protection, using a Roadhawk bullet cam clamped to the offside mirror mount. That did for a few years, until I switched to a GoPro. For that I just stuck one of their slide-in mounts to the front of the screen. Despite nervousness about the tape holding, it’s proven really solid and delivers very smooth and solid video.
Splash Guard (removal): The standard rear splash guard is a very solid piece of kit: possibly too solid. It adds no small amount to unsprung weight at the rear and is a complete pain when it comes to adjusting the chain. I removed it when adjusting the chain one day and simply haven’t got around to putting it back on.

Chain & Sprockets: given that Ducati’s OEM Regina chains are made of cheese that I had a subsequent poor experience with JT, I’ve now reverted to my long-term preference: OEM front sprockets, Supersprox modular rear sprockets and DID XZX chains. I’ve also geared it down with two extra teeth on the rear sprocket – this makes it a little busier at motorway speed, but stops sixth gear being an overdrive, and makes it more manageable around town: third rather than second gear in 30mph limits now does fine. So far, so good…

Big Pannier Lids: Although the panniers were standard on the Touring package, along with the centre stand and heated grips, the optional big lids for the panniers were an optional extra. The good news is that, when fitted, they hold a huge amount – we were able to tour the Outer Hebrides for a fortnight, not just with sufficient clean underwear to avoid offending the locals but with my usual ton or so of camera gear and tripods. The less good news is that, until Ducati were shamed into coming out with some accessory (and inconvenient) additional clips for the lids, they leaked like a sieve and were quite capable of scooping up snowdrifts and passing sheep. And of course, they’re wide: very wide, so wide in fact that oncoming buses on narrow Highland roads were in danger of being punted into the scenery. As for filtering, just don’t.
Heated Grips: I live in Highland Scotland, so a complete no-brainer. They work
The Bling Thing

Harley riders do chrome’n’leather. Ducati riders acquire carbon. Guilty as charged, and my machine is adorned with carbon in the form of a belly pan from Ilmberger Carbon (a lovely thing), the factory-supplied Termignoni end can, plus assorted Ducati Performance bits.
These probably save no more than a pork pie or two from the overall weight of the machine, and make precisely zero difference to the dynamics, but they do look good, including…
…carbon tank cover, front mudguard, rear hugger, front sprocket cover.

I also ordered it with the factory option Termignoni end can. Which looks good, sounds much the same as the stock end can and gets in the way of my right heel if I’m riding with the balls of my feet on the footpegs. Ah well.
Sixteen years, and the mods which have turned my Multistrada from a commodity item to something that works with me and for me. But it may now be time to move on…
Leave a Reply